1 Central control system (intelligent management, real-time monitoring and whole-process guarantee)
Advantages:
1) HTMES production management system can monitor the production process in whole process;
2) Manual, automatic and semi-automatic circulation can be used;
3) Communicate with each equipment of the production line to complete the coordinated production of the production line;
4) Auxiliary control operation of video monitoring system;
5) It can realize the fault display, query and alarm functions of the whole production line;
6) Be able to connect with the component production ERP system;
7) It can realize the monitoring of temperature and humidity of pre-curing kiln,
8) Independent production site central control room
2. Mould table circulation system
2.1 Mould table (4*9M)
characteristic: parameter overall dimension weight material flatness specification 9000mm×4000mm×310mm 5.7t Q345B ≤±1.5/3000mm
bear weight: 6.5kN/m2
1) The structure is solid and durable, and the fatigue strength is large during vibration and erection, and
the service life can reach 3000 times in normal use;
2) Through finite element analysis and technological means, effectively
control the deformation of the service life is longer;
2.2 Supporting roller
characteristic: parameter overall size specification weight 216mm×180mm×465mm 24kg the height 450mm 1) . It is independently fixed on the ground as the bearing conveyor wheel of the formwork; 2) . Maintenance-free structure
2.3 Driving roller
characteristic: 1) Type A: ordinary motor, Type B: high temperature and humidity resistant motor, Type D: brake motor; 2) Special reinforced wear-resistant rubber wheel with high friction and long service life; 3) The abrasion of rubber wheel can be adjusted and compensated to ensure the smooth operation of the production line; 4) The installation height can be adjusted to greatly eliminate the influence of uneven ground and make the installation more convenient.
2.4 Inductive anti-collision device
characteristic: Parameter name, overall dimension weight sensing range specification 170mm×80mm×210mm 4.5kg 22mm speed control fixed speed
1) The protective part adopts the guide wheel structure to reduce the damage to the inductor caused by the movement of the mould table and improve the safety factor;
2) Simple and reliable structure, maintenance-fre
2.5 Side shifter
characteristic: equipment power button+knob, fixed operation interface three-phase five-wire 380V 50Hz.
1) Driven by servo motor, high positioning accuracy.
2) The imported PLC controller is adopted, with high synchronization of the two machines, and accuracy
error ≤ 3%.
3) The computer control automatically completes the track-change operation, with stable performance and convenient and safe operation.
And so on.
){kind=link}